Medusa PRO v.1.4.3 Release Notes: - Motorola Factory Repair feature has been released. You can try to repair boot on Motorola devices, based on Qualcomm CPUs, via eMMC by using original Motorola firmwares (firmwares with “*.xml”). This feature can be useful if you don’t have the same...
Medusa PRO v.1.4.3 Release Notes:

- Motorola Factory Repair feature has been released.

You can try to repair boot on Motorola devices, based on Qualcomm CPUs, via eMMC by using original Motorola firmwares (firmwares with “*.xml”).

This feature can be useful if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported.
Note, device should have non-damaged CID partition, otherwise it could cause problems with writing firmware after repairing. We recommended making backup of CID partition before repairing. Also, software will automatically try to detect and backup (read) CID partition from the phone to “Backup” folder after connecting.

- Added support for the following models via eMMC:

• Motorola XT1021 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Motorola XT1030 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Motorola XT1032 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Motorola XT1034 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Motorola XT1541 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Motorola XT1064 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Motorola XT1097 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Microsoft Lumia 535 (RM-1090) - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

- Box firmware has been updated to 1.21 version! In this firmware version we have improved eMMC Read/Write operations.
To update firmware automatically, it is necessary to connect the Box and only then run the software.
Also, you can update Box firmware manually via “Update Box Firmware” button at the “Welcome” tab in Medusa Pro software.

- Released Pause/Resume operations in Download Manager (“Download *.srf” button in Software).

- Uploaded new “Live logs” in to the Support Area

- All pinouts and repair procedures are described in the manual ("Help" button in the Software)


More info and discussion are HERE
__________________________________________________
WBR,
Medusa Box Team