تسجيل الدخول

جديد الموقع



الملاحظات

آخر أخبار و تحديثات GSM News & Updates القسم مختص بـ آخر أخبار المحمول و التحديثات الخاصة بالبوكسات الجديدة والإصدارات الجديدة للبرامج .

🐙 Octoplus / Octopus Box Samsung v.2.6.1 - new unique Reset FRP method via UART 🐙

آخر أخبار و تحديثات GSM News & Updates

 
أدوات الموضوعانواع عرض الموضوع
قديم 2017-10-25, 04:55 PM المشاركة : ( 1
أخبار الهوستينج
.:: عضو مبدع ::.
 
صورة رمزية إفتراضية للعضو أخبار الهوستينج

تاريخ التسجيل
Mar 2017

رقم العضوية
3

عدد المشاركات
1,163

نقاط التقييم
10

تم شكره 54 مرة في 50 مشاركة

Post 🐙 Octoplus / Octopus Box Samsung v.2.6.1 - new unique Reset FRP method via UART 🐙

Octoplus / Octopus Box Samsung Software v.2.6.1 Release Notes:**🐙 *Added world's first Reset FRP / Reactivation lock “Via UART (eMMC memory chip)”* operation via Micro UART cable for devices with eMMC memory chip:* - *SM-A310F, SM-A310FD, SM-A310M, SM-A310N0, SM-A310MD, SM-A310Y* -...
Octoplus / Octopus Box Samsung Software v.2.6.1 Release Notes:
🐙 Added world's first Reset FRP / Reactivation lock “Via UART (eMMC memory chip)”* operation via Micro UART cable for devices with eMMC memory chip:
- SM-A310F, SM-A310FD, SM-A310M, SM-A310N0, SM-A310MD, SM-A310Y
- SM-A510F, SM-A510FD, SM-A510M, SM-A510MD, SM-A510Y, SM-A510YD, SM-A510S, SM-A510K, SM-A510L
- SM-A710F, SM-A710FD, SM-A710M, SM-A710MD, SM-A710Y, SM-A710S, SM-A710K, SM-A710L
- SM-G570F, SM-G570FD, SM-G570M, SM-G570MD, SM-G570Y
- SM-G610F, SM-G610FD, SM-G610FZ, SM-G610M, SM-G610L, SM-G610K, SM-G610S, SM-G610Y
- SM-J7108, SM-J710F, SM-J710FQ, SM-J710FZ, SM-J710FD, SM-J710FN, SM-J710GN, SM-J710K, M-J710MN
- SM-T580, SM-T585, SM-T585C


To perform new reset FRP operation, do the following steps:
1. Select the abovementioned device model in Software's list.
2. Press “Reset FRP / Reactivation” button.
3. Select first Reset FRP / Reactivation lock method (press “Via UART (EMMC memory chip)” button).
4. Connect the phone to Box via Samsung Micro UART cable.
5. Press and hold "Vol-" and "Power" buttons for 15-20 seconds and wait until software requests to connect Micro USB cable.
6. Connect the phone to PC via Micro USB cable. Software will read certain data.
7. Connect the phone to Box again via Samsung Micro UART cable according to Software request.
8. Press and hold "Vol-" and "Power" buttons for 15-20 seconds.
9. Follow software instructions (prompts).
* Note: this operation works for the mentioned above devices with Android 6.x firmwares' versions and may not work for some phones’ S-boot. In this case try to write another firmware version or only S-boot from firmware and repeat the operation again.
🐙 Added support for the following models:
- SM-G892U - added Read Codes via server, Read / Write NVM, Read / Write QCN, Reboot in Download / Recovery mode, Read PIT – world's first
- SC-01K - added Read Codes via server, Read / Write NVM, Read / Write QCN, Reboot in Download / Recovery mode, Read PIT
- SCV37 - added Read Codes via server, Read / Write NVM, Read / Write QCN, Reboot in Download / Recovery mode, Read PIT
- SM-T385 - added Read Codes via server, Read / Write NVM, Read / Write QCN, Reboot in Download / Recovery mode, Read PIT
- SM-T385C - added Read Codes via server, Read / Write NVM, Read / Write QCN, Reboot in Download / Recovery mode, Read PIT
- SM-G950U - added Direct Unlock (Sprint) (in test mode, root needed)
- SM-G955U - added Direct Unlock (Sprint) (in test mode, root needed)
- SM-N950U - added Direct Unlock (Sprint) (in test mode, root needed)
- SM-G532F - added Repair Security**, Read Codes (no root needed)
- SM-G532FD - added Repair Security**, Read Codes (no root needed)
- SM-G532G - added Repair Security**, Read Codes (no root needed)
- SM-G532M - added Repair Security**, Read Codes (no root needed)
- SM-G532MT - added Repair Security**, Read Codes (no root needed)
- SM-J100M - added Repair IMEI, Repair Network
- SM-J100F - added Repair IMEI, Repair Network
- SM-J100FN - added Repair IMEI, Repair Network
- SM-J100G - added Repair IMEI, Repair Network
- SM-J100MU - added Repair IMEI, Repair Network
- SM-J100MV - added Repair IMEI, Repair Network
- SM-J100Y - added Repair IMEI, Repair Network
- SM-G388F - added Repair IMEI, Repair Network
- SM-G531F - added Repair IMEI, Repair Network
- SM-G531BT - added Repair IMEI, Repair Network
- SM-G531Y - added Repair IMEI, Repair Network
- SM-G361F - added Repair IMEI, Repair Network
- SM-J110F - added Repair IMEI, Repair Network
- SM-J110G - added Repair IMEI, Repair Network
- SM-J110M - added Repair IMEI, Repair Network
- SM-T2397 - added Repair IMEI, Repair Network

🐙 Improved “Repair IMEI” and “Repair Network” operations for Spreadtrum devices
🐙 Improved connection operation via UART for "Reset FRP via UART (UFS)" operation
🐙 Improved Unlock operation for SM-J701F, SM-J701FD, SM-J701M and SM-J701MT devices
** “Repair Security” operation will reset IMEI to its original version!

More info and discussion are HERE
_______________________________________________
WBR,
Octoplus Box Team


مـن مـواضـيـع : أخبار الهوستينج
    مساحة إعلانية
    🐙 Octoplus / Octopus Box Samsung v.2.6.1 - new unique Reset FRP method via UART 🐙

    أدوات الموضوع
    انواع عرض الموضوع

    الانتقال السريع

    المواضيع المتشابهه
    الموضوع
    🐙 Octoplus / Octopus Box Samsung v.2.5.8 - added Z4 + more QC for Read Codes 🐙
    🐙 Octoplus/Octopus Box LG v.2.6.8 - Reset FRP for Android 7.0! 🐙
    🐙 Octoplus / Octopus Box Samsung v.2.5.0 - SM-A810x series added! 🐙
    🐙 Octoplus / Octopus Box Samsung v.2.4.9 - support for latest Security patches! 🐙
    🐙 Octoplus / Octopus Box Samsung v.2.4.8 - Repair Network/IMEI for many Exynos'es 🐙


    Powered by vBulletin® Version 3.8.10
    Copyright ©2000 - 2018, Jelsoft Enterprises Ltd. TranZ By Almuhajir