Octoplus JTAG PRO Software v.1.3.7 Release Notes:**🐙 *Added support for the following models via eMMC:* * *Samsung SM-J100M – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files* * *Samsung SM-J200H – added Read/Write/Erase, Easy Repair, Partition Manager,...
Octoplus JTAG PRO Software v.1.3.7 Release Notes:

🐙 Added support for the following models via eMMC:

• Samsung SM-J100M – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung SM-J200H – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung GT-I8552 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung GT-I9195 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG VS410PP – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG VS425LPP – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG M250N – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Nokia Lumia 630 Dual SIM (RM-978) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Asus Zenfone 2 (Z00ED) 16GB – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

🐙 Added «eMMC Write/Update firmware» for the following Samsung eMMC chips:

• KLMAG2GE4GA-A001 (MAG2GA)
• KMK3U000VM-B410 (K3U00M)

🐙 Improved NAND configuration stage and Read/Write/Erase operations for HiSilicon Hi6731 CPU. Updated for new CPU revisions.

🐙 Added support for the following devices via JTAG:

• Huawei E173z-1 – added Read/Write/Erase, Easy Repair
• Huawei E303s-1 – added Read/Write/Erase, Easy Repair
• Huawei E353Ws-2 – added Read/Write/Erase, Easy Repair
• Huawei E352b – added Read/Write/Erase, Easy Repair
• Huawei E3131 – added Read/Write/Erase, Easy Repair

🐙 Box firmware has been updated to 1.17 version! In 1.17 firmware version we have improved eMMC connection and eMMC Read operations.
To update firmware automatically, it is necessary to connect the Box and only then run the software.
Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Octoplus JTAG PRO software.

🐙 Uploaded new “Live logs” in to the Support Area

🐙 All pinouts and Repair procedures described in the manual ("Help" button in the software)

Also, we have improved support for HiSilicon Hi6731 CPU (Read/Write/Erase/Easy Repair operations) and for mentioned above Huawei devices in old Octoplus Software.

We have uploaded «Octoplus JTAG Software Installer 1.9.5.4» into the Support Area and Octoplus Box site.


More info and discussion are HERE
____________________________________________
WBR,
Octoplus Box Team